Need help?Do you have a question about the Cino FuzzyScan Series and is the answer not in the manual?
Step-by-step guide on how to properly install the scanner's battery pack into the device.
Instructions for charging the scanner's battery using the provided power supply unit and cradle.
Details on how to charge the scanner's battery using a USB 3.0 port on a host device.
Step-by-step instructions for connecting the scanner to a host device using PAIR mode.
Guide on how to use the PICO mode for connecting multiple scanners to a single cradle.
Instructions for setting up and using the HID mode for Bluetooth keyboard emulation.
Detailed steps for establishing SPP Master and Slave connections for serial communication.
Enables scanning and storing data when the radio connection with the host is lost.
Configures the scanner for hand-free operation, automatically switching to presentation mode.
Instructions on how to manually power off the scanner using a command.
Utilizes batch scanning to store up to 100,000 barcodes for inventory applications.
Methods to transmit stored barcode data and quantity information from the scanner.
Command to remove the most recently scanned barcode data to correct errors.
Lists essential system commands for scanner management, configuration, and diagnostics.
General| Image Sensor | CMOS |
|---|---|
| Connectivity | USB |
| Decoding Capability | 1D/2D Barcodes |
| Operating Temperature | 0°C to 50°C |
| Print Contrast | ≥20% |
| Humidity | 5% to 95% (non-condensing) |
| Supported Symbologies | QR Code, Data Matrix, PDF417, UPC, EAN, Code 39, Code 128 |
| Operating Voltage | 5V DC |
To Next Page