Need help?Do you have a question about the Cino Fuzzyscan and is the answer not in the manual?
Introduction to the Cino FuzzyScan Bar Code Scanner and its performance capabilities.
Supports USB and RS-232 Serial interfaces for connecting to host devices.
Details on connecting the scanner via RS232 serial interface, including driver needs.
Configuration for USB HID (keyboard) and USB COM port emulation modes.
Designed for hands-free applications, allowing adjustable scanner positioning for optimal scanning.
Adjusts scanner sensitivity for dim lighting and improves detection in presentation mode.
Enables or disables background lighting for A series imagers in presentation mode.
Scanner is in standby until trigger is pressed; light source activates on trigger pull.
Scanner is preset to activate background lighting and scans automatically upon image detection.
Light source stays on until a preset time expires; re-enables on trigger press.
Light source stays on until decode or time-out; turns off after decode or inactivity.
Light source is continuously on for high-speed scanning without trigger press.
Light source turns on with trigger press and stays on until trigger is pressed again.
Light source is forced on for diagnostics, ignoring other parameters.
Scanner enters idle state after scanning; requires trigger press to wake up.
Allows decoding of multiple bar codes with a single trigger pull.
Scanner is in standby until trigger is pressed; light source activates on trigger pull.
Scanner activates light source and scans automatically upon image detection.
Light source stays on until a preset time expires; re-enables on trigger press.
Light source stays on until decode or time-out; turns off after decode or inactivity.
Scanner flashes light source without trigger press; activates on image detection.
Light source is continuously on for high-speed scanning without trigger press.
Light source turns on with trigger press and stays on until trigger is pressed again.
Light source is forced on for diagnostics, ignoring other parameters.
Scanner enters idle state after scanning; requires trigger press to wake up.
Configures suffix characters like RETURN, TAB, and SPACE for keyboard output.
Sets the keyboard layout for different countries and regions.
Configures the data transmission speed for keyboard interfaces.
Sets data frame parameters such as parity and stop bits.
Retrieves scanner system status and configuration details.
Establishes a connection for the PowerTool utility.
Resets or saves factory, master, and user default settings.
Commands to enter and exit the scanner's programming mode.
Configures the scanner to operate using the RS232 serial interface.
Configures USB HID for standard or turbo mode operation.
Configures the scanner to emulate a USB COM port.
Bar codes for numerical digits used in scanner configuration.
Bar codes for alphabetical characters used in scanner configuration.
The 'FIN' bar code indicates the completion of a configuration sequence.
Configures keyboard layout, record suffix, and associated option codes.
Sets preamble, postamble, intermessage, intercharacter, and interfunction delays.
Manages Caps Lock behavior and enables ASCII output as function/Ctrl keys.
Controls keypad emulation and scanner output case (normal, inverse, upper, lower).
Controls STX/ETX transmission and data frame parameters for serial communication.
Configures suffix characters, preamble, and postamble for serial data.
Manages handshaking protocols and various transmission delays.
Sets serial response time-out and NAK retry count for serial communication.
Details the structure of data strings for keyboard interface output.
Details the structure of data strings for serial interface output.
Maps ANSI/ASCII codes to function keys and control outputs.
Reference table for HEX and ASCII character codes and their representations.
General| Brand | Cino |
|---|---|
| Model | Fuzzyscan |
| Category | Barcode Reader |
| Language | English |
To Next Page