160
Android Deployment Configurator User Guide
EZConig is a built-in UHF RFID application which is for CipheLab RK25 mobile computer to
works with RK25 UHF RFID Reader to read RFID tags. Please refer to
EZConfig User Guide
for Android for the detailed instruction.l
Please click on each category to list the settings.
To set the LED and beeper notification:
Low Battery LED
Check to enable the LED indicator of RK25 UHF RFID Reader which
will flash in red 5 times every 2 minutes or when it wakes up from
suspend mode if the battery power level is 0%
To Next Page
Loading...
