51
Project Management & Main Screen
Depending on the project device model, the listed options may be slightly different.
“Barcode Reader” is to configure the scan engine inside the mobile computer through the
built-in application “
ReaderConfig”. It allows users to set their scanner preferences and the
way to output decoded data. Symbology and scanner settings can be saved and exported as
a profile for importing again or implementing identical Reader Config settings on multiple
devices.
For the function of “
ReaderConfig”, please refer to ReaderConfig User Guide for Android.
Note:
By checking “Barcode Reader”, “File Transfer” of General Options will be automatically
selected.
“Button Assignment” is to redefine the functions of physical keys to trigger different actions.
Settings made to one or more keys can be saved as a profile, allowing users to switch
conveniently between different sets of settings.
For the project device model which sets as RS35, RK25, RK95, and 9700A, please refer to
Button Assignment User Guide for Android.
“Terminal Emulation” is developed for industries which use terminal emulators extensively.
It enables your mobile computer to act as a terminal emulator while communicating with a
host of the same environment.
For further information, please refer to
Terminal Emulation User Guide (Android).
Note:
By checking “Terminal Emulation”, “File Transfer” of General Options will be automatically
selected.
To Next Page
Loading...
Need help?
General
