161
Customize Project Configuration
Low Battery LED
Check to enable the LED indicator of RK25 UHF RFID Reader which
will flash in red 5 times every 2 minutes or when it wakes up from
suspend mode if the battery power level is 0%
Beep when good read
Select to mute the beeper for good read, or set the sound for good
read.
Low Battery Beep
To enable the low battery notification sound which occurs when the
RK25 UHF RFID Reader’s battery power level is 0%.
Temperature Warning
Check to enable the notification to prompt you if the RK25 UHF RFID
Reader is over 65
. The high temperature warning will not go off
until the temperature drops down to 62
.
Power Level
To drag the slider to adjust the power level for reading distance.
Trigger Key
Set the reading mode when pressing the trigger once:
Once
To read the tag(s) once.
Continuous
To keep reading the tag(s) till the trigger is released.
Alternate
To perform “Once” and “Continues” one after the other
repeatedly.
To Next Page
Loading...
Need help?
General
