Why is the System Error LED blinking on my CircuPool CORE55?
If the System Error LED is blinking on your CircuPool Water Filtration System, it may be due to debris stuck in the electrical connection between the cell and control module. Remove the control module from the cell and clean it. If the issue persists, there may be another communication problem between the cell and control module; in this case, contact Customer Support.
What to do if the System Error LED is on in CircuPool CORE55 Water Filtration Systems?
If the System Error LED is on in your CircuPool Water Filtration System, it could be due to debris stuck in the electrical connection between the cell and control module. Remove the control module from the cell and clean it. Also, inspect the cell blades for debris or scaling and clean if necessary. If the issue continues, a more serious error may have occurred, and you should contact Customer Support.
Why are all the LED lights flashing on my CircuPool CORE55?
If all the LED lights are flashing on your CircuPool Water Filtration System, the salt level may be greatly out of range. Manually verify the salinity.
Covers risks of electric shock, GFCI, grounding, and safe wiring practices.
Addresses safe mounting distances, proximity to metal, and proper connections.
Instructions and chart for adding the correct amount of salt based on pool size and existing levels.
Description of the control panel buttons, LED indicators, and system messages.
Step-by-step instructions for safely cleaning mineral buildup from the cell.
Detailed steps and illustrations for cutting pipe and connecting the system to the pool's return line.
Diagnosing and resolving issues with low or no chlorine, including cloudy or green pool conditions.
Troubleshooting low chlorine levels immediately following system installation.
Steps to take if the unit is not receiving power or is not turning on.
Troubleshooting blinking 'System Error' due to electrical connection issues.
Addressing 'System Error' related to communication problems or other malfunctions.
General| Type | Saltwater Chlorinator |
|---|---|
| Model | CORE55 |
| Pool Size | Up to 55, 000 Gallons |
| Output | 55, 000 gallons |
| Cell Type | Titanium |
| Cell Life | Up to 10, 000 hours |
| Flow Switch | Yes |
| Self-Cleaning | Yes |
| Flow Rate | 20-120 GPM |
| Warranty | 3 years |
To Next Page
