9
Always double-check the voltage of your power source. Connection to
improper voltage can: a) cause severe damage/harm, or b) cause lights
and screen to power on without system function.
In some parts of the United States and Canada, the Control Module
must be connected to a circuit protected by a Class A ground fault
interrupter (GFI). Check local codes before connecting.
At this point, this installation of your equipment is complete. If the
water has not yet been prepared, then you are ready to begin adding
salt and balancing your water chemistry. Turn to Control Module to the
Power Off mode until enough salt has been added to the water.
The following information will give you more information about the
process of adding salt. Be sure to familiarize yourself with your pool's
ideal chemistry levels, which play a critical role in the operation and
longevity of your pool and pool equipment. For more information, see
page 17.
To Next Page
Loading...
