The status of the Auto Repeat is
shown at the bottom of the
screen.
In this example, the Auto Repeat
is switched on.
When the Auto Repeat is switched
off, the display is Repx
Measurement Auto Synchronise
Key Press Display
Comments
The status of the Auto
Synchronise is shown at the
bottom of the screen.
In this example, the Auto
Synchronise is switched on.
When the Auto Synchronise is
switched off, the display is Syncx
Configuring the instrument from the Deaf Defier3 software
The entire configuration of the instrument can be set from the Deaf Defier3 software
using the Advanced Configuration option.