Cirrus Design Section 8
SR20 Handling, Servicing, and Maintenance
P/N 21399-004 8-3P/N 21399-004 8-3
Introduction
This section provides general guidelines for handling, servicing and
maintaining your aircraft. In order to ensure continued safe and
efficient operation of your airplane, keep in contact with your
Authorized Cirrus Service Center to obtain the latest information
pertaining to your aircraft.
Operator’s Publications
The FAA Approved Airplane Flight Manual and Pilot’s Operating
Handbook (POH) is provided at delivery. Additional or replacement
copies may be obtained from Cirrus Design.
Service Publications
The following service publications are available for purchase from
Cirrus Design:
• Airplane Maintenance Manual (AMM) – Maintenance Manual
divided into chapters as specified by GAMA and ATA covering
inspection, servicing, maintenance, troubleshooting, and repair
of the airplane structure, systems, and wiring. Revision Service
for this manual is also available. A current copy of the AMM is
provided at delivery.
• Engine Operators and Maintenance Manual – Cirrus Design
provides a Teledyne Continental Engine Operator’s and
Maintenance Manual at the time of delivery. Engine and engine
accessory overhaul manuals can be obtained from the original
equipment manufacturer.
• Avionics Component Operator and Maintenance Manuals -–
Cirrus Design provides all available operator’s manuals at the
time of delivery. Maintenance manuals, if available, may be
obtained from the original equipment manufacturer.
Cirrus Design publishes Service Bulletins, Service Advisories, and
Service Information Letters. Copies can be obtained from Cirrus
Design at www.cirrusaircraft.com
.
• Service Bulletins – are of special importance. When a Service
Bulletin affecting your airplane is published, comply with it
promptly.
• Service Advisories – are used to notify you of optional Service
Bulletins, vendor Service Bulletins or Service Information Letters
Revision A1
To Next Page
Loading...
