Cirrus Design Section 3A
SR22 Abnormal Procedures
P/N 13772-004 3A-11P/N 13772-004 3A-11
1. Fuel Quantity Gages .......................................................... CHECK
2. Fuel Pump ......................................................................... BOOST
If HIGH BOOST already in use for vapor suppression, pump
should be left in this position for tank switch.
3. Fuel Selector.......................................... SELECT FULLEST TANK
4. Fuel Pump ............................................................. AS REQUIRED
After switching tanks, message will remain until sensed
imbalance is less than 8 gallons.
Amplification
Fuel level imbalance (between left and right) is greater than 8 gallons.
Original Issue