EasyManua.ls Logo

Cirrus SR22 - Original Issue

Cirrus SR22
470 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cirrus Design Front Matter
SR22 Foreword
P/N 13772-004 Front Matter-3P/N 13772-004 Front Matter-3
Revising the Pilot’s Operating Handbook
Two types of revisions may be issued for this POH: Temporary and
Numbered.
Temporary revisions are printed on yellow paper, normally cover only
one topic or procedure, and are issued to provide safety related
information or other time sensitive information where the rigor of
providing a numbered revision is not possible in the time allowed. All
the information needed to properly file a temporary revision is included
on the revision itself. Typically, a temporary revision is superseded and
replaced by the next numbered revision.
Numbered revisions are printed on white paper, normally cover
several subjects, and are issued as general updates to the POH. Each
numbered revision includes an “Instruction Sheet,” a “List of Effective
Pages”, and a “Revision Highlights” page. The “Instruction Sheet” is
intended to assist the manual holder in removing superseded pages
and inserting new or superseding pages. The “List of Effective Pages”
shows the issue or revision status of all pages in the POH. The
“Revision Highlights” page gives a brief description of changes made
to each page in the current revision.
Identifying Revised Material
Each page in the POH has revision identification at the lower inside
corner opposite the page number. Original issue pages will be
identified by the words “Original Issue” at this location. In the event
that the majority of pages in the POH are revised, Cirrus may
determine that it is more effective to reissue the POH. Reissued pages
will be identified by the word “Reissue” followed by a letter indicating
the reissue level; for example, “Reissue A” Revised pages will be
identified by the word “Revision” followed by the revision number at
this location; for example, “Revision 2” (Original Issue, Revision 2) or
“Revision B1” (Reissue B, Revision 1).
Revised material on a page can be identified by a change bar located
at the outside page margin. Revision bars are not used at reissues of
the POH.
Revision 1

Table of Contents

Other manuals for Cirrus SR22

Related product manuals