3-22 P/N 23020-002
Cirrus SR20 and SR22 Flight Operations Manual
Section 3 Standard Operating Procedures
Before Taxi
Complete the Before Taxi checklist as a flow and reference the aircraft
checklist to verify all items are complete. It is recommended to
program the required navigation information and communication
frequencies for the intended flight at this time. Navigation information
should be entered into the flight plan via the Garmin Control Unit
(GCU). Set primary airborne frequencies into COM 1 and necessary
ground frequencies into COM 2. Set applicable VOR frequencies if
necessary at this time.
Obtain airport weather information and call for IFR and/or taxi
clearance if applicable. Verify the waypoints entered into the flight plan
match the IFR clearance obtained including applicable departure
procedures.
Before Taxi Flow
June 2008
To Next Page
Loading...
