Cirrus SR22 - Electrical System Emergencies

P/N 23020-002 3-65
Cirrus SR20 and SR22 Flight Operations Manual
Section 3 Standard Operating Procedures
Procedure (Flow Pattern)
1. Power Lever ................................................................... 1000 RPM
Reduce power to 1000 RPM during taxi. Changes in engine speed
should be used to accelerate or decelerate the aircraft along with
minimal braking as necessary.
2. Fuel Pump ............................................................................... OFF
Select Fuel Pump OFF after clearing runway.
3. Flaps .......................................................................................... UP
Select flaps to 0% (UP) after clearing runway.
4. Transponder ...........................................................................STBY
Ensure transponder has automatically cycled to STBY. If not,
select STBY manually.
5. Lights ..................................................................... AS REQUIRED
Reduce external lighting once clearing the runway to the minimum
required for safe/legal operation so as to avoid creating a hazard
to others.
6. Pitot Heat .................................................................................OFF
Select Pitot Heat OFF.
June 2008