Cirrus SR22 - Autopilot Stall Recognition (Cont); AP Stall Recognition (Power On)

4-6 P/N 23020-002
Cirrus SR20 and SR22 Flight Operations Manual
Section 4 Maneuvers
Autopilot Stall Recognition (Cont)
AP Stall Recognition (Power On)
Execution
• Execute clearing turns,
> SR20 - 25% Power / 11" MP (approximately),
> SR22 - 15% Power / 12" MP (approximately),
> SR22 Turbo - 25% Power / 12" MP (approximately).
• Flaps 0%,
• Engage HDG and VS with a 1600 FPM climb,
• Apply minimum 65% power.
• Note •
Autopilot will increase the angle of attack to increase altitude
sacrificing airspeed. Recovery will be initiated at a speed no
lower than 80 KIAS as per the autopilot limitation.
Recovery
• Disconnect autopilot and simultaneously,
• Reduce angle of attack and level wings,
• Verify full power.
June 2008