CISA MyEVO - Operating the External Keypad

- 22 -
Operating the external keypad
Every time a key is pressed, a short beep is heard and the symbol will ash green.
If the wrong code is entered, a long beep is heard and the symbol will ash red.
To open the door
1. Press the CISA writing to
activate the keypad;
2. Enter the user code;
3. The deadbolts and latchbolt
will retract and the door can
be opened;
4. 3 short beeps are heard and
the
symbol will ash
green 3 times.
To open the door - Scramble Code mode
1. Press the CISA writing to
activate the keypad;
2. Enter the code 0000 to
activate the “Sliding Code”
mode;
3. Enter the user code preced-
ed by an arbitrary number of
gures; the total number of
gures must be 12 or less;
4. The deadbolts and latchbolt
will retract and the door can
be opened;
5. 3 short beeps are heard and
the
symbol will ash
green 3 times.
To close the door - Semi-automatic mode
A = CISA writing
B = Green LED (operation suc-
cessfully completed)
C = Red LED (error)
D = Yellow LED (programming)
EN
A
B