CISA MyEVO - Page 25

- 25 -
5. Changing the Master Code
5.1. Press the CISA writing to activate the keypad;
5.2. Enter the 8-digit Master Code;
5.3. Press 5;
5.4. Enter the new Master Code;
5.5. Re-enter the Master Code.
a. If the operation is successfully completed, 2
short beeps are heard and the
symbol will
ash green twice;
b. otherwise a long beep will be heard and the
symbol will ash red.
6. Disabling/enabling the internal button and remote control
6.1. Press the CISA writing to activate the keypad;
6.2. Enter the 8-digit Master Code;
6.3. Press 6.
a. If the operation is successfully completed, 2
short beeps are heard and the
symbol will
ash green twice;
b. otherwise a long beep will be heard and the
symbol will ash red.
7. Selecting automatic mode
7.1. Press the CISA writing to activate the keypad;
7.2. Enter the 8-digit Master Code;
7.3. Press 7.
a. If the operation is successfully completed, 2
short beeps are heard and the
symbol will
ash green twice;
b. otherwise a long beep will be heard and the
symbol will ash red.
8. Selecting semi-automatic mode
8.1. Press the CISA writing to activate the keypad;
8.2. Enter the 8-digit Master Code;
8.3. Press 8.
a. If the operation is successfully completed, 2
short beeps are heard and the
symbol will
ash green twice;
b. otherwise a long beep will be heard and the
symbol will ash red.
9. Selecting hold open mode
9.1. Press the CISA writing to activate the keypad;
9.2. Enter the 8-digit Master Code;
9.3. Press 9.
a. If the operation is successfully completed, 2
short beeps are heard and the
symbol will
ash green twice;
b. otherwise a long beep will be heard and the
symbol will ash red.
10. Factory setup
10.1. Press the CISA writing to activate the keypad;
10.2. Enter the 8-digit Master Code;
10.3. Press 0;
10.4.Re-enter the Master Code.
a. If the operation is successfully completed, 2
short beeps are heard and the
symbol will
ash green twice;
b. otherwise a long beep will be heard and the
symbol will ash red.
EN