VIEW Certified Configuration Guide
PN: 1725-36192-001_H
4. Under DHCP Information, enter the IP address of the Primary DHCP
Server.
5. Repeat this step for the ap-manager interface.
6. Click the Apply button and save the changes.
AP Configuration
All handsets operating on a given AP radio must have the same
QoS setting. All APs supporting the handsets must be configured to
enable the corresponding features.
1. Power-on and connect the APs to the network. Wait a few minutes
for the APs to find the controller.
2. Verify the APs are associated to the WLC.
3. From the main menu, click Monitor.
To Next Page
Loading...
