Cisco 1230AG - Aironet - Wireless Access Point - Setting up the SSID

Section 2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
PN: 1725-36192-001_H 37
17. In the navigation pane under 802.11a/n, select Voice
18. Select the Admission Control (ACM) checkbox. (This step is optional if
the handset is configured with Admission Control set to Optional,
this setting must match setting in Video)
19. In the navigation pane under 802.11a/n, select Video
20. Select the Admission Control (ACM) checkbox. (This step is optional if
the handset is configured with Admission Control set to Optional,
this setting must match setting in Voice)
21. Click the Apply button to save the settings.
22. In the navigation pane under 802.11a/n, select Network.
23. For 802.11a Network Status, click the Enabled check box.
24. Click the Apply button to save the settings.
Setting up the SSID
Voice and data must be on separate SSIDs to prioritize voice traffic.
The voice SSID must be set to Platinum for Quality of Service and the
data SSID must be set to Silver for Quality of Service.