VIEW Certified Configuration Guide
PN: 1725-36192-001_H
1. From the main menu, click WLANs.
2. In the WLANs screen, select Create New from the drop down list and
click Go.
3. Enter the Profile Name and SSID.
4. Click the Apply button twice.
5. Select the Profile Name for the voice SSID.
6. Under the General tab, verify the Radio Policy corresponds to the
SpectraLink Wireless Telephone configuration.
When Radio Policy is configured for 802.11b/g only, the handsets
should be configured for 802.11b & b/g mixed.
When Radio Policy is configured for 802.11a only, the handsets
should be configured for 802.11a.
When Radio Policy is configured for All, the handsets may be
configured to any of the settings required.
7. For Status, select the Enabled check box.
To Next Page
Loading...
