VIEW Certified Configuration Guide
PN: 1725-36192-001_H
3. Select Configure from the drop-down list for the access point you
wish to change.
Global settings for RF Channel Assignment and Tx Power Level
Assignment were not tested. For Custom Tx Power and RF Channel
settings please consult your facility’s RF site survey — optimized for
wireless voice traffic — to determine correct power and channel
settings for each AP using only channels 1, 6 and 11.
4. Set Admin Status to Enable.
5. Configure any other settings that might be relevant to your
deployment as needed.
6. Click the Apply button to save all changes.
Screenshot for 1100, 1130, 1200, 1230 and 1240 series access points:
To Next Page
Loading...
