Cisco 1230AG - Aironet - Wireless Access Point - Page 35

Section 2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
PN: 1725-36192-001_H 35
Screenshot for 1100, 1130, 1200, 1230 and 1240 series access points:
Screenshot for 1140 and 1250 series access points:
7. In the navigation pane under 802.11a/n, click Network.
8. Set 802.11a Network Status to Disable; the radio will be re-enabled
after setting radio parameters
9. For setting up the Data Rates, please consult your facility’s RF site
survey, designed for voice traffic, to determine if you have sufficient
coverage to support all data rates. The handset requires the following
minimum dBm reading to support the corresponding Mandatory data
rate setting in the access point.
802.11
Radio Standard
Minimum Available
Signal Strength (RSSI)
Maximum
"Mandatory" Data Rate
802.11b
-70 dBm
1 Mb/s
-60 dBm
11 Mb/s
802.11g
-63 dBm
6 Mb/s
-47 dBm
54 Mb/s
802.11a
-60 dBm
6 Mb/s
-45 dBm
54 Mb/s