30
Configuring an ADSL WAN Interface Card on Cisco 1700 Series Routers
OL-3317-03
Obtaining Documentation
no ip address
no atm ilmi-keepalive
pvc 0/33
encapsulation aal5mux frame-relay
!
dsl operating-mode auto
!
connect frf5 serial0 100 atm1 0/33 network-interworking
FRF.8
The following example shows how to create an FRF.8 connection, using the service-interworking
keyword in the connect command.
interface serial0
no ip address
encapsulation frame-relay IETF
no fair-queue
frame-relay interface-dlci 100 switched
frame-relay intf-type dce
!
interface atm1
no ip address
no atm ilmi-keepalive
pvc 0/33
encapsulation aal5mux fr-atm-srv
!
dsl operating-mode auto
!
connect frf8 serial0 100 atm1 0/33 service-interworking
Obtaining Documentation
These sections explain how to obtain documentation from Cisco Systems.
World Wide Web
You can access the most current Cisco documentation on the World Wide Web at this URL:
http://www.cisco.com
Translated documentation is available at this URL:
http://www.cisco.com/public/countries_languages.shtml
Documentation CD-ROM
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM
package, which is shipped with your product. The Documentation CD-ROM is updated monthly and may
be more current than printed documentation. The CD-ROM package is available as a single unit or
through an annual subscription.
To Next Page
Loading...
Need help?
General
