What to do if my Cisco Network Router fails to power on?
If your Cisco Network Router fails to power on, ensure that all power cords are correctly connected both to the router and at the power connection end. Also, verify that the power switch is in the ON position.
What to do if Cisco ASR 1013 system fails to boot up properly?
If your Cisco Network Router has power but fails to boot up properly, check the STATUS LED on the ASR 1000 Series route processor. Make sure all connections are secure.
Outlines mandatory basic configuration steps via a console connection before network connection.
Instructs on enabling FIPS mode for the TOE, which is essential for the CC evaluation.
Details the secure configuration of remote administration, primarily using SSH over IPsec.
Details password complexity requirements and configuration for secure administrator access.
General| Product Series | ASR 1000 |
|---|---|
| Model | ASR 1013 |
| Product Type | Router |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Input Frequency | 50 to 60 Hz |
| Number of Expansion Slots | 8 |
| Memory | 8 GB (default) |
| Flash Memory | 16 GB (optional) |
| Power Supply | AC or DC |
| Cooling | Front-to-back airflow |
| Operating System | Cisco IOS XE |
| Dimensions (H x W x D) | 17.5 x 17.5 x 24 in |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Relative Humidity | 5% to 95% (non-condensing) |
| Input Voltage | 100 to 240 VAC |
To Next Page