EasyManuals Logo

Cisco 1800 Series User Manual

Cisco 1800 Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Warning
There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s
instructions. Statement 1015
Installing the Router
Note Cisco 1800 series routers are normally ordered with modules and interface cards. Before you remove or install any
modules or interface cards, refer to the documents that accompany those items or to the online Cisco 1800 series
hardware installation documentation at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm
You can set any Cisco 1800 series router on a desktop or mount it on the wall. See the applicable instructions in the following
sections:
Wall-Mounting the Router, page 10
Installing the Router on a Desktop, page 12
Caution To prevent damage to the chassis, never attempt to lift or tilt the chassis by the plastic panel on the front. Always
hold the chassis by the metal body.
Wall-Mounting the Router
Warning
This unit is intended to be mounted on a wall. Please read the wall mounting instructions carefully before
beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a
hazardous situation to people and damage to the system. Statement 248
The Cisco 1841 router can be wall-mounted by using two No. 6, 3/4-inch screws and the mounting features on the bottom of
the router. We recommend using pan-head or round-head screws (not included).
The wall-mounting features on the router are shown in Figure 1.

Other manuals for Cisco 1800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 1800 Series and is the answer not in the manual?

Cisco 1800 Series Specifications

General IconGeneral
CategoryNetwork Router
PerformanceVaries by model
Form FactorDesktop
Connectivity TechnologyWired
Remote Management ProtocolSNMP, Telnet, HTTP, HTTPS
DimensionsVaries by model
WeightVaries by model
Model1800 Series
InterfacesEthernet, Fast Ethernet, Serial, ISDN
Routing ProtocolsRIP, OSPF, EIGRP, BGP
SecurityFirewall, VPN, ACLs
Data Link ProtocolEthernet, Fast Ethernet, Serial, Frame Relay
Network / Transport ProtocolTCP/IP
FeaturesQuality of Service (QoS), VLAN support, DHCP server
RAMVaries by model
Flash MemoryVaries by model
Power SupplyInternal AC power supply
Operating Temperature0 to 40 °C (32 to 104 °F)
Storage Temperature-4°F to 149°F (-20°C to 65°C)

Related product manuals