Cisco 2500 Series User Manual

Index
IN-7
Cisco Video Surveillance 2500 Series IP Camera User Guide
OL-19273-02
port for power adapter 1-5
powering off the IP camera 2-8
powering on the IP camera 2-8
Power over Ethernet (PoE) 2-1
terminal block 2-4
power adapter
connecting 2-4
supported 2-1
Power over Ethernet (PoE) 1-4, 2-1
preset list 3-37, 3-38
preset position
configuring 3-36
moving IP camera to 4-3
Preset Positions window
options 3-37
overview 3-37
privilege level, for users 3-17
processes
descriptions 3-26
stopping 3-26
Product Process window
options 3-26
overview 3-26
PTZ
Baud rate 3-36
configuring 3-36
data bits 3-36
enabling external control of 3-36
logical address of controlling device 3-36
pan speed 3-38
parity 3-36
stop bits 3-36
tilt speed 3-38
PTZ (RS-485) window
options 3-36
overview 3-36
Q
Quality of Service (QoS), enabling 3-13
R
Ready LED 1-3
rebooting, IP camera 2-9
region, for wireless IP camera 3-10, 3-11
reset
factory default values 2-9
IP address 2-9
Reset button 1-4
resetting the IP camera 1-4
resolution
See video, resolution
restarting, IP camera 3-18
restoring, factory default configurations 3-18
root password 3-27
RTP data port 3-12
RTSP port 3-12
S
saturation, of video 3-22
scheduling, events 3-32
SDRAM 3-33, 3-41, 3-46
secure connection 2-7
security
authentication, for wireless IP camera 3-9
controlling processes 3-26
for wireless IP camera 3-8
mixed mode 3-8
mode for wireless IP camera 3-8
password hardening 3-27
protocol type 3-10
shared key 3-9
stopping processes 3-26
WEP encryption 3-8

Cisco 2500 Series Specifications

General

Brand	Cisco
Model	2500 Series
Category	Controller
Language	English