Cisco 6841 Administration Guide

Programmable Softkeys
DescriptionParameter
Enables programmable softkeys.Programmable Softkey Enable
Softkeys that display when the phone is idle.Idle Key List
Softkeys that display when the phone is off-hook.Off Hook Key List
Softkeys that display when the user must enter dialing
data.
Dialing Input Key List
Softkeys that display when a call is attempting to
connect.
Progressing Key List
Softkeys that display when a call is connected.Connected Key List
Softkeys that display when a call transfer has been
initiated.
Start-Xfer Key List
Softkeys that display when a conference call has been
initiated.
Start-Conf Key List
Softkeys that display when a conference call is in
progress.
Conferencing Key List
Softkeys that display when a call is released.Releasing Key List
Softkeys that display when one or more calls are on
hold.
Hold Key List
Softkeys that display when a call is incoming.
To silence an incoming call, you can add Ignore
softkey.
Ringing Key List
Softkeys that display when a call is active on a shared
line.
Shared Active Key List
Softkeys that display when a call is on hold on a
shared line.
Shared Held Key List
Programmable softkey fields. Enter a string in these
fields to configure softkeys that display on the phone
screen. You can create softkeys for speed dials to
numbers or extensions, vertical service activation
codes (* codes), or XML scripts.
PSK 1 through PSK 16
Extension
Extension
In a configuration profile, the Line parameters must be appended with the appropriate numeral to indicate the
line to which the setting applies. For example:
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
275
Phone Troubleshooting
Programmable Softkeys

Cisco 6841 Specifications

General

Brand	Cisco
Model	6841
Category	IP Phone
Language	English