Cisco 6841 Administration Guide

DescriptionParameter
Enables the user to add a disposition code. Select Yes
to enable or No to disable.
Default: No
Disposition Code Enable
Enables the user to trace the last incoming call. Select
Yes to enable or No to disable.
Default: No
Trace Enable
Enables the user to escalate a call to a supervisor in
case of emergency. Select Yes to enable or No to
disable.
Default: No
Emergency Escalation Enable
Displays the call center status and the agent status.
Select Yes to enable or No to disable.
Default: No
Queue Status Notification Enable
Proxy and Registration
DescriptionParameter
SIP proxy server and port number set by the service
provider for all outbound requests. For example:
192.168.2.100:6060.
The port number is optional. If you don't specify a
port, the default port 5060 is used for UDP, and the
default port 5061 is used for TLS.
When you need to refer to this proxy in another
setting, for example, the speed dial line key
configuration, use the $PROXY macro variable.
Proxy
All outbound requests are sent as the first hop. Enter
an IP address or domain name.
Outbound Proxy
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
283
Phone Troubleshooting
Proxy and Registration

Cisco 6841 Specifications

General

Brand	Cisco
Model	6841
Category	IP Phone
Language	English