Cisco 7000 Series - Page 276

Index 2 Cisco 7010 Hardware Installation and Maintenance
See optical bypass switch
C
C (Connected) LED on HIP
See LEDs
CAB-ATM-DS3/E3 3-12
CAB-FMDD FDDI optical bypass cable 2-33
CAB-HNUL HSSI null modem cable 2-19, A-13
cable management brackets
ACS-7010CBLM= FRU 5-71
installing 3-7
cable management kit
hardware 2-46
using 2-14
cable retention clip on power supply 5-72
cables
100BASE-T 2-6
4-40 thumbscrews on serial 2-19
AC power 1-7
attaching
FEIP 3-14
avoiding crossing 3-10
CAB-ATM-DS3/E3 3-12
connecting external 3-10
console port 2-18, A-2
distance limitations 2-5
E1-G.703/G.704 2-39
Ethernet 10BASE-2 and 10BASE-5 2-5
Ethernet transceiver A-3
Fast Ethernet specifications 2-6
FDDI 2-32
FEIP 2-27
fiber 2-32
FSIP 1-30, 2-19
guidelines 3-10
HSSI interface 2-43
HSSI null modem 2-44
interference 2-4
lobe (Token Ring) 2-30, A-5
M3 metric thumbscrews 2-38
MII and RJ-45, FEIP 2-27
MII specifications 2-6
MIP 2-36
monomode (FDDI) 2-32
multimode (FDDI) 2-32
optical bypass (FDDI) A-5
patch (Token Ring) 2-30
power 5-78
retention clip, power 5-78
safety guidelines 2-3
SCSI-II and HIP 2-43, A-12
serial 2-38
single-mode (FDDI) 2-32
strain relief 2-27, 5-10
swapping power 4-6
Token Ring A-5
ungrounded 2-3
uninsulated 2-3
universal serial port adapter 1-30, 2-19, 2-38, A-6
captive installation screws
chassis cover panel 5-73
for ESD prevention 2-3
IPs 4-9, 5-7
caution
hanging the router 5-18
reset switch B-2
caution, description iii
CHAS-7010= spare chassis with power supply 5-71
chassis
CHAS-7010= spare chassis with power supply 5-71
clearance 1-42, 2-14
cover panel
description 1-3, 5-72
removing and replacing 5-73
dimensions 1-5, 2-14
environment 2-15
feet 2-14, 3-6
footprint 2-15
ground 1-7
interface processor end (illustration) 1-4
internal components 1-6, 5-72
lifting 2-2, 3-6
MAS-7010= FRU 5-71
noninterface processor end (illustration) 1-6
operating specifications 1-5
physical specifications 1-5
rear view (illustration) 1-4
specifications 1-5
temperature 1-40
top-down view (illustration) 1-6
checklist, installation 2-48
CIP
microcode ROM replacement 5-11
Cisco 7000 Series
downloadable software and microcode 1-12
interface addresses 1-35
platform comparison 1-2
Cisco Extended Bus
See CxBus
Class A stations (FDDI), description 2-33
Class B stations (FDDI), description 2-33
clearance for air circulation 2-14
clearance, chassis 1-42, 3-1
clock
acceptable rates for serial 5-48
and HSSI interfaces 1-32, 3-24
and loopback test 5-47
and serial interfaces 1-29, 2-40, 3-22