EasyManua.ls Logo

Cisco 7000 Series - Page 277

Cisco 7000 Series
287 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index 3
and synchronous transmission 1-16, 2-44
arbiter (CxBus) 1-6
DCE signals 2-40
DTE signals 2-40
inverting on serial interfaces 5-47
clockrate command 2-40, 5-48
Collision LED on EIP
See LEDs
collision, on Ethernet network 2-24
commands
b (boot) 5-19
boot 5-14
boot system 5-20, 5-24
boot system flash 5-22
boot system flash filename 3-33, 5-21
Break (interrupt) 5-21
clockrate 5-48
config-register 3-33, 5-19, 5-20, 5-22, 5-24
configure 5-8
configure terminal 5-19, 5-20, 5-24
copy 3-31
crc32 5-49
early token release 2-32
enable 5-18, 5-24
Flash-related 5-19
hssi internal-clock 3-24
i (initialize) 5-23
invert-transmit-clock 5-48
microcode card rom 5-12
microcode reload 5-12
nrzi encoding 5-49
o/r (reset) 5-23
reload 5-19
ring-speed 2-32
setup 5-8
show configuration 5-23
show controller cxbus 5-50
show controllers 5-8
show environment 1-42, 2-17
show environment all 1-45
show environment last 1-43
show environment table 1-43
show interfaces 1-36, 5-8
show version 4-7, 5-19, 5-23
shutdown 5-51
concentrator, in FDDI network 2-34
config-register command 3-33
configuration
notes 5-1
register 5-13
boot field 5-20
worksheet 2-47, 2-50, 3-10
configure command 5-8
configuring
MIP 5-57
Conn LED on FSIP
See LEDs
connector
AUI 2-23, A-3
auxiliary port 1-15, A-2
console port 1-15, A-2
DB-9 1-34
DIN A-5
Ethernet 2-26, A-3
FC 1-27
FSIP 1-30, 2-38
MAU plug for Token Ring 2-29
MIC 1-27
MII and RJ-45 2-27
mini-DIN 1-27, A-5
optical bypass switch A-5
RJ-11 Token Ring 2-29
RS-232 1-30, 2-41, A-7
RS-449 1-30, 2-41, A-8
RS-530 2-43
Token Ring 2-29, A-5
TRIP A-5
universal serial port adapter 2-38
universal serial port adapters 1-30
V.35 1-30, 2-42, A-10
X.21 1-30, 2-42
console port A-2
baud rate 5-16
cable 2-18
description 1-15, 2-44
settings 5-21
terminal 4-5
conventions
See document conventions
cooling subsystem 4-3, 4-6
copy command 3-31
copying to Flash 5-22
cover
backplane 5-72
power harness 5-72
cover panel
illustration 1-3
CPU
FSIP 1-28
system 1-11, 4-5
CPU Halt LED on RP
See LEDs
CRC
configuring 32-bit 5-49
description 2-40
crc32 command 5-49
Critical status level, environmental monitor 1-41
CSA agency approvals 1-5
CSMA/CD, description 2-24
CSU 2-19

Table of Contents

Related product manuals