Cisco 7600 Series Guide

CHAPTER
1-1
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
OL-10100-04
1
Cisco 7600 Product Overview
This chapter provides an overview of the Cisco 7600 series routers and describes interface and port
addresses on the routers. It contains the following sections:
• Cisco 7600 Series Routers, page 1-1
• Port Addresses, page 1-5
Note This document does not contain instructions for installing the router. For instructions on how to install
the router, see the Cisco 7600 Series Router Installation Guide.
Cisco 7600 Series Routers
The Cisco 7600 series routers consist of these routers:
• Cisco 7603 router (3 slots)
• Cisco 7604 router (4 slots)
• Cisco 7606 router (6 slots)
• Cisco 7609 router (9 vertical slots)
• Cisco 7613 router (13 slots)
Note In addition, Cisco IOS Release 12.2SRB and later releases introduced enhanced versions of the 3-slot, 6-slot,
and 9-slot chassis (CISCO7603-S, CISCO7606-S, and CISCO7609-S). These enhanced chassis provide
increased power and cooling capabilities and an enhanced switch fabric to support high-power processors and
future line cards, which will provide 80-Gbps connections.
Cisco 7600 series routers provide optical wide area network (WAN) and metropolitan-area network
(MAN) networking with a focus on line-rate delivery of high-touch IP services at the edge of service
provider networks.

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13