Cisco 800 - Skip a Window

2-3
Cisco 800 Fast Step Software Design Guide
OL-10373-02
Chapter 2 CFG File Development
CFG File Modification
Skip a Window
You can prevent a window from displaying by modifying the flags in the [SkippedDialog] section of a
CFG file. The flag names correspond to the windows in the Setup application. The following example
skips the Review Settings screen:
[SkippedDialog]
ReviewSettings= 1
The flags used to skip windows are as follows:
[SkippedDialog]
SkipToSetupandTest=
ReviewSettings=
RemoteConnectionType=
TypeOfProtocolsServices=
RouterTypeDeviceSetupMethod=
CostControlSettings=
YourISDNPhoneNumbers=
ISDNSettings=
RemotePhoneNumbersISP=
RemotePhoneNumbersRCN=
PPPUsernameAndPasswordISP=
PPPUsernameAndPasswordRCN=
TestingInterfaceConnectionISP=
TestingInterfaceConnectionRCN=
IPAddressRangeGivenByYourISP=
WANIPAddressAndMaskISP=
WANIPAddressAndMaskRCN=
IPXWANAddressRCN=
NextConnection=
InternetServerConnection=
InternetServerTypeSelection=
InternetServersIPAddressesGivenbyISP=
LocalInternetServers=
LANTrafficControl=
LANIPAddressAndMaskForEthernet0=
IPXLANAddressAndFrameTypeForEthernet0=
DomainNameServerSettings=
WINSSettings=
StartRouterSetup=
SaveFileAs=
StartMonitoring=
DLCINumberISP=
DLCINumberRCN=
FrameRelayDLCINumberISP
FrameRelayDLCINumberRCN
PCToRouterConnection=
RestartToCompleteSetupInitial=
RestartToCompleteSetupFinal=
If the flag value is set to 0 or blank, the window is displayed.
If the flag value is set to 1, Setup skips the window.