SummaryDate
Adds descriptions and installation instructions for the
following SPAs:
• SPA-2XT3E3
• SPA-4XT3E3
2-port and 4-Port Clear Channel T3/E3 SPA
• SPA-1XCHSTM1/OC3
1-Port Channelized OC-3/STM-1 SPA
• SPA-4XOC3
4-Port OC-3/STM-1 POS SPA
• SPA-8XOC3
8-Port OC-3/STM-1 POS SPA
December 2010
Adds descriptions and installation instructions for the
following SPAs:
• SPA-1XCHOC48/DS3
1-Port Channelized OC48/STM16 DS3 SPA
• SPA-2XOC48POS/RPR
2-Port OC-48/STM16 SPA
• SPA-8XOC12-POS
8-Port OC12/STM4 SPA
• SPA-OC192POS-XFP
1-Port OC-192/STM-64 POS/RPR SPA
September 2010
Initial release and first publication. Provides
descriptions and installation instructions for the
following SIPs and SPAs:
• Cisco ASR 9000 SIP-700
• 2-Port Channelized OC-12/DS0 SPA
December 2009
Objectives
This document describes the shared port adapters (SPAs) and SPA Interface Processors (SIPs) that are supported
on Cisco ASR 9000 Series Routers. This document also describes how to install the supported SIPs and SPAs
and how to troubleshoot the installation.
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
xi
Preface
Objectives
To Next Page
Loading...
Need help?
General
