20
Cisco Aironet Series 1600/2600/3600 Access Point Deployment Guide, Release 7.5
Unique Installations
Figure 24 Example of how to hang an AP above the ceiling tiles
Note Installing APs above the ceiling tiles should only be done when mounting below the ceiling is not an
option. The tiles must not be conductive; such installations can certainly degrade advanced RF features
such as voice and location, so verify coverage and performance. Always try to mount the AP as close to
the inside middle of the tile as possible, and avoid areas with obstructions (Figure 25).
Figure 25 Installing AP above ceiling tiles: Pick an area clear of obstructions, avoid ceiling clutter
To Next Page
Loading...
