34
Cisco Aironet Series 1600/2600/3600 Access Point Deployment Guide, Release 7.5
Understanding External Antenna Deployments
Figure 43 Radiation Patterns for the AP 1600i @ 2.4 GHz
Figure 44 Radiation Patterns for the AP 1600i @ 5 GHz
Understanding External Antenna Deployments
All Cisco antenna connectors are labeled “A” “B” “C” and so on… “A” has a higher priority than “B”
or “C/D” so if the Access Point supports say 3 or 4 antennas and you only have 2 antennas, you would
use them on ports “A” and “B” (short term until you could install the additional antennas).
To Next Page
Loading...
