5
–
Mode button. For information on how to use the Mode button, see “Using the Mode Button”
section on page 23.
–
USB 2.0 port (No software support at this time)
–
One multi-color LED status indicator. See the “Checking the Access Point LEDs” section on
page 21 for information on the colors of the LED status indicator.
–
1 x 10/100/1000 Mbps WAN Ethernet Port (RJ-45), with PoE support.
• 1832I model access point has three integrated 2.4 GHz and 5 GHz dual-band antennas. Peak
antenna gain is approximately 3 dBi and 5 dBi in 2.4 GHz and 5 GHz bands respectively.
To Next Page
Loading...
