EasyManua.ls Logo

Cisco Aironet 1830 Series - Access Point Features

Cisco Aironet 1830 Series
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Model numbers ending in C are, by default, factory-shipped with a Cisco Mobility Express software
image. For more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guid
e.html
Access Point Features
A full listing of the access point's features and specification are provided in the Cisco Aironet 1830
Series Access Point Data Sheet, at the following URL:
http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1830-series-access-points/datashee
t-c78-735582.html
The features of the 1830 series access points at release are:
Supported mode(s) of operation:
Centralized
Supports Cisco Mobility Express solution. The 1830 series access point can operate as a master
AP (having an integrated wireless controller functionality) in a Cisco Mobility Express network.
For more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_
Guide.html
Radio features supported are:
2.4 GHz and 5 GHz concurrent radios
2 GHz radio with 3TX x 3RX and two spatial streams SU-MIMO
5 GHz radio with 3TX x 3RX 802.11ac Wave 2 capable with two spatial streams SU-MIMO
and MU-MIMO
802.11ac based Transmit Beamforming
Quality of Service (QoS)
Radio Resource Management (RRM)
Rogue Detection
BandSelect
The AP supports the following hardware external interfaces:
RS-232 Console Interface through RJ-45
Local Power DC Jack

Table of Contents

Related product manuals