Cisco Aironet 2600 Series User Manual

© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 7
Item Specification
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the
regulatory domain that corresponds to a particular country, visit: http://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global
Price List.
Software Cisco Unified Wireless Network Software Release 7.2.110 or later.
Supported Wireless
LAN Controllers
●
Cisco 2500 Series, Cisco Wireless LAN Controller Module (WLCM) on Cisco Services Ready Engine (SRE) for
Integrated Services Router Generation 2 (ISR G2), Cisco Wireless Services Module 2 (WiSM2), Cisco 5500 Series,
Cisco Flex 7500 Series
802.11n Version 2.0
(and Related)
Capabilities
●
3x4 multiple-input multiple-output (MIMO) with three spatial streams
●
Maximal ratio combining (MRC)
●
802.11n and 802.11a/g beamforming
●
20- and 40-MHz channels
●
PHY data rates up to 450 Mbps (40-MHz with 5 GHz)
●
Packet aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service Unit
(A-MSDU) (Tx/Rx)
●
802.11 dynamic frequency selection (DFS)
●
Cyclic shift diversity (CSD) support
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates (2.4 GHz
1
and 5 GHz):
GI
3
= 800ns GI = 400ns MCS Index
2
20-MHz Rate (Mbps) 40-MHz Rate (Mbps) 20-MHz Rate (Mbps) 40-MHz Rate (Mbps)
0 6.5 13.5 7.2 15
1 13 27 14.4 30
2 19.5 40.5 21.7 45
3 26 54 28.9 60
4 39 81 43.3 90
5 52 108 57.8 120
6 58.5 121.5 65 135
7 65 135 72.2 150
8 13 27 14.4 30
9 26 54 28.9 60
10 39 81 43.3 90
11 52 108 57.8 120
12 78 162 86.7 180
13 104 216 115.6 240
14 117 243 130 270
15 130 270 144.4 300
16 19.5 40.5 21.7 45
17 39 81 43.3 90
18 58.5 121.5 65 135
19 78 162 86.7 180
20 117 243 130 270
Data Rates
Supported
21 156 324 173.3 360
1
2.4 GHz: 2 GHz does not support 40 MHz.
2
MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the modulation,
the coding rate, and data rate values.
3
GI: A guard interval (GI) between symbols helps receivers overcome the effects of multipath delays.

Cisco Aironet 2600 Series Specifications

General

Model	Cisco Aironet 2600 Series
Category	Wireless Access Point
Wireless Standards	802.11a/b/g/n
Frequency Bands	2.4 GHz and 5 GHz
Operating Temperature	0 to 40°C (32 to 104°F)
Ethernet Ports	1 x 10/100/1000BASE-T (RJ-45)
Power Options	PoE
Antenna	Internal or external antennas
Security	WPA, WPA2, 802.1X, TKIP, AES
Maximum Data Rate	450 Mbps
Mounting	Ceiling, wall
Management	Cisco Prime Infrastructure
MIMO	3x4 MIMO with three spatial streams