9
4 Open the Access Point Management Pages
After you have determined or assigned the access point’s IP address, you can open the Access Point
Management Pages.
Step 1 Open your Internet browser. You must use Microsoft Internet Explorer or Netscape
Navigator/Communicator, versions 4.0 or later.
Step 2 Enter the access point’s IP address in the browser address line and press Enter. Depending on
the method used to assign the IP address, either the Summary Status screen or the Express
Setup screen opens. From the Summary Status (Home) screen, click Setup and Express Setup
to open the Express Setup screen shown below:
Step 3 Enter the case-sensitive SSID provided by your system administrator. Click Apply.
Your access point is now up and running. Consult the software configuration guide on the CD for a
description of the access point system management functions and instructions for accessing the Help
files.
To Next Page
Loading...
