Cisco AS5400 - Connect AC Power

26
Connect AC Power
Step 1 Connect the black power cord to the receptacle on the power supply at the rear of the universal gateway.
Connecting AC Power Cord to Cisco AS5350 Single Power Supply
Note For the Cisco AS5350 redundant power supply, use the special power cable that came with your universal gateway.
Connecting AC Power Cord to Cisco AS5350 Redundant Power Supply
Note The Cisco AS5350 redundant power supply is supported in Cisco IOS Release 12.2{2)XB5 or later releases.
Alarm Pinouts
Pin
1
1. The pins are numbered from left to right (facing the back of
the chassis), starting with pin 1.
Description
1 Normally open
2Pole
3 Normally closed
35678
Power switch
82079
Power switch
Power cables