Cisco ASA 5506-X Configuration Guide

1-6
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 1
Use Case: Expose a Server to the Public
Figure 1-1 Static NAT for an Inside Web Server
Procedure
Step 1 Create a network object for the internal web server.
hostname(config)# object network myWebServ
hostname(config-network-object)# host 10.1.2.27
Step 2 Configure static NAT for the object:
hostname(config-network-object)# nat (inside,outside) static 209.165.201.10
Step 3 Add an access rule to the access group attached to the outside interface to permit web access to the
server.
hostname(config)# access-list outside_access_in line 1 extended permit tcp any4 object
myWebServ eq http
Step 4 If you do not already have an access group on the outside interface, apply it using the access-group
command:
hostname(config)# access-group outside_access_in in interface outside
Related Topics
• Static NAT, page 9-27
Outside
Inside
10.1.2.1
209.165.201.1
Security
Appliance
myWebServ
10.1.2.27
209.165.201.12
10.1.2.27 209.165.201.10
248772
Undo Translation

Cisco ASA 5506-X Specifications

General

Model	ASA 5506-X
Firewall Throughput	750 Mbps
Maximum Firewall Connections	50, 000
Maximum VPN Peers	50
Integrated Ports	8 x 1 GE
Stateful Inspection Throughput	750 Mbps
Weight	4.4 lb (2 kg)
Firewall Throughput (Multiprotocol)	750 Mbps
Firewall Throughput (Application Visibility and Control AVC)	250 Mbps
Concurrent Sessions	50, 000
New Connections per Second	10, 000
IPsec VPN Throughput	100 Mbps
Interfaces	8 x 1 GE
Memory	4 GB
Flash Memory	8 GB
Form Factor	Desktop
VPN Throughput	100 Mbps
Maximum Concurrent Sessions	50, 000
New Sessions per Second	10, 000
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-13 to 158°F (-25 to 70°C)
Power Supply	External
Humidity	10% to 90% non-condensing