Cisco ASA 5506-X Configuration Guide

8-14
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 8 ASA and Cisco Cloud Web Security
Monitoring Cloud Web Security
Configure the Cloud Web Security Policy
After you configure the ASA service policy rules, launch the ScanCenter Portal to configure Web content
scanning, filtering, malware protection services, and reports.
Go to: https://scancenter.scansafe.com/portal/admin/login.jsp.
For more information, see the Cisco ScanSafe Cloud Web Security Configuration Guides:
http://www.cisco.com/en/US/products/ps11720/products_installation_and_configuration_guides_list.h
tml
Monitoring Cloud Web Security
To monitor Cloud Web Security, use the following commands:
• show scansafe server
Shows the status of the server, whether it is the currently active server, the backup server, or
unreachable.
hostname# show scansafe server
hostname# Primary: proxy197.scansafe.net (72.37.244.115) (REACHABLE)*
hostname# Backup: proxy137.scansafe.net (80.254.152.99)
• show scansafe statistics
Shows information about Cloud Web Security activity, such as the number of connections redirected
to the proxy server, the number of current connections being redirected, and the number of white
listed connections:
hostname# show scansafe statistics
Current HTTP sessions : 0
Current HTTPS sessions : 0
Total HTTP Sessions : 0
Total HTTPS Sessions : 0
Total Fail HTTP sessions : 0
Total Fail HTTPS sessions : 0
Total Bytes In : 0 Bytes
Total Bytes Out : 0 Bytes
HTTP session Connect Latency in ms(min/max/avg) : 0/0/0
HTTPS session Connect Latency in ms(min/max/avg) : 0/0/0
• show service policy inspect scansafe
Shows the number of connections that are redirected or white listed by a particular policy.
hostname(config)# show service-policy inspect scansafe
Global policy:
Service-policy: global_policy
Class-map: inspection_default
Interface inside:
Service-policy: scansafe-pmap
Class-map: scansafe-cmap
Inspect: scansafe p-scansafe fail-open, packet 0, drop 0, reset-drop 0,
v6-fail-close 0
Number of whitelisted connections: 0
Number of connections allowed without scansafe inspection because of "fail-open"
config: 0
Number of connections dropped because of "fail-close" config: 0
Number of HTTP connections inspected: 0
Number of HTTPS connections inspected: 0

Cisco ASA 5506-X Specifications

General

Model	ASA 5506-X
Firewall Throughput	750 Mbps
Maximum Firewall Connections	50, 000
Maximum VPN Peers	50
Integrated Ports	8 x 1 GE
Stateful Inspection Throughput	750 Mbps
Weight	4.4 lb (2 kg)
Firewall Throughput (Multiprotocol)	750 Mbps
Firewall Throughput (Application Visibility and Control AVC)	250 Mbps
Concurrent Sessions	50, 000
New Connections per Second	10, 000
IPsec VPN Throughput	100 Mbps
Interfaces	8 x 1 GE
Memory	4 GB
Flash Memory	8 GB
Form Factor	Desktop
VPN Throughput	100 Mbps
Maximum Concurrent Sessions	50, 000
New Sessions per Second	10, 000
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-13 to 158°F (-25 to 70°C)
Power Supply	External
Humidity	10% to 90% non-condensing