Preparing for Installation
This chapter provides preinstallation information, such as recommendations and requirements you should
be perform before installing your Cisco ASR 9000 Series Router.
The shipping package for the router is engineered to reduce the chances of product damage associated with
routine material handling experienced during shipment:
•
Always transport or store the router in its shipping package in the upright position.
•
Keep the router in the shipping container until you have determined the installation site.
Inspect all items for shipping damage. If an item appears damaged, contact a Cisco customer service
representative immediately.
•
Preparing for Installation, page 1
Preparing for Installation
This chapter provides preinstallation information, such as recommendations and requirements you should be
perform before installing your Cisco ASR 9000 Series Router.
The shipping package for the router is engineered to reduce the chances of product damage associated with
routine material handling experienced during shipment:
•
Always transport or store the router in its shipping package in the upright position.
•
Keep the router in the shipping container until you have determined the installation site.
Inspect all items for shipping damage. If an item appears damaged, contact a Cisco customer service
representative immediately.
Safety Guidelines
Before you perform any procedure in this guide, you must review the safety guidelines in this section to avoid
injuring yourself or damaging the equipment.
Note that this section contains guidelines and do not include every potentially hazardous situation. When you
install a router, always use common sense and caution.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
1
To Next Page
Need help?
General
