To Next PageTo Next Page
How to fix lower ROM Monitor version detected on Cisco ASR 9000 Network Router?
If a lower version of the ROM Monitor is detected during system boot of your Cisco Network Router, use the "upgrade hw-module fpd" CLI in admin mode.
General| Series | ASR 9000 |
|---|---|
| Category | Network Router |
| Modular Design | Yes |
| Redundancy | Yes (Hardware and Software) |
| Operating System | Cisco IOS XR |
| Interfaces/Ports | 10G, 40G, 100G, 400G Ethernet |
| Expansion Slots | Varies by model |
| Routing Protocol | BGP, OSPF, IS-IS, EIGRP |
| Management | CLI, SNMP, NETCONF |
| Power Supply | Redundant |
| Port Density | Varies by model |
| Power Supply Options | AC, DC |
| Memory | Varies by model |
| Storage | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
