Cisco ASR 9000 Series Routing Configuration Guide

PurposeCommand or Action
Distributes BGP link-state information to the specified
neighbor.
address-family link-state link-state
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)#
Step 5
address-family link-state link-state
commit
Step 6
Configuring Domain Distinguisher
To configure unique identifier four-octet ASN, perform these steps:
SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
address-family link-state link-state
4.
domain-distinguisher unique-id
5.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Specifies the BGP AS number and enters the BGP
configuration mode, allowing you to configure the
BGP routing process.
router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp 100
Step 2
Enters address-family link-state configuration mode.address-family link-state link-state
Example:
RP/0/RSP0/CPU0:router(config-bgp)# address-family
Step 3
link-state link-state
Configures unique identifier four-octet ASN. Range
is from 1 to 4294967295.
domain-distinguisher unique-id
Example:
RP/0/RSP0/CPU0:router(config-bgp-af)#
Step 4
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
170
Implementing BGP
Configuring BGP Link-State

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model