PurposeCommand or Action
Disables TCP MSS for the neighbor.tcp mss inheritance-disable
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)# tcp mss
inheritance-disable
Step 13
Specifies the IPv4 address family unicast and enters address
family configuration mode.
address-family ipv4 unicast
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)#
address-family ipv4 unicast
Step 14
RP/0/RSP0/CPU0:router(config-bgp-nbr-af)#
commit
Step 15
Redistributing Prefixes into Multiprotocol BGP
Perform this task to redistribute prefixes from another protocol into multiprotocol BGP.
Redistribution is the process of injecting prefixes from one routing protocol into another routing protocol.
This task shows how to inject prefixes from another routing protocol into multiprotocol BGP. Specifically,
prefixes that are redistributed into multiprotocol BGP using the redistribute command are injected into the
unicast database, the multicast database, or both.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
98
Implementing BGP
Redistributing Prefixes into Multiprotocol BGP
To Next Page
Loading...
Need help?
General
