Cisco ASR 9000 Series

PurposeCommand or Action
Verifies if selective VRF download
is inactive by confirming that svd
show svd role
Example:
RP/0/RSP0/CPU0:router#show svd role
Step 9
roles are "standard" for the line
cards that have VRF interfaces on
them.
Codes: (C) : user Configured role
Node Name IPv4 Role IPv6 Role
--------------------------------------------------------------------
0/RSP0/CPU0 Standard Standard
0/0/CPU0 Standard Standard
0/1/CPU0 Standard Standard
Configuring Resilient Per-CE Label Allocation Mode
Configuring Resilient Per-CE Label Allocation Mode Under VRF Address Family
Perform this task to configure resilient per-ce label allocation mode under VRF address family.
Resilient per-CE 6PE label allocation is not supported on CRS-1 and CRS-3 routers, but supported only
on CRS-X routers.
Note
SUMMARY STEPS
1.
configure
2.
router bgpas-number
3.
vrfvrf-instance
4.
address-family {ipv4 | ipv6} unicast
5.
label mode per-ce
6.
Do one of the following:
•
end
•
commit
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
181
Implementing BGP
Configuring Resilient Per-CE Label Allocation Mode