Cisco ASR 9000 Series Routing Configuration Guide

PurposeCommand or Action
•
redistribute isis process-id [ level { 1 | 1-inter-area | 2 }] [
metric metric-value ] [ route-policy route-policy-name ]
•
redistribute ospf process-id [ match { external [ 1 | 2 ] |
internal | nssa-external [ 1 | 2 ]]} [ metric metric-value ] [
route-policy route-policy-name ]
•
redistribute ospfv3 process-id [ match { external [ 1 | 2 ] |
internal | nssa-external [ 1 | 2 ]]} [ metric metric-value ] [
route-policy route-policy-name ]
•
redistribute rip [ metric metric-value ] [ route-policy
route-policy-name ]
•
redistribute static [ metric metric-value ] [ route-policy
route-policy-name ]
Example:
RP/0/RSP0/CPU0:router(config-bgp-af)# redistribute ospf 110
commit
Step 5
Configuring BGP Route Dampening
Perform this task to configure and monitor BGP route dampening.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
100
Implementing BGP
Configuring BGP Route Dampening

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model