Cisco ASR 9000 Series Routing Configuration Guide

Background Scan
In Background Scan, user configures the scan that is then left to run in the background. The configuration
consists of the time period for the periodic scan. This scan can be configured on either a single table or multiple
tables. LCC performs background scan on the LSD, where as RCC performs it either for default or other
VRFs.
How to Deploy and Monitor RIB
To deploy and monitor RIB, you must understand the following concepts:
Verifying RIB Configuration Using the Routing Table
Perform this task to verify the RIB configuration to ensure that RIB is running on the RP and functioning
properly by checking the routing table summary and details.
SUMMARY STEPS
1.
show route [ vrf { vrf-name | all }] [ afi-all | ipv4 | ipv6 ] [ unicast | multicast | safi-all ] summary
[ detail ] [ standby ]
2.
show route [ vrf { vrf-name | all }] [ afi-all | ipv4 | ipv6 ] [ unicast | multicast | safi-all ] [ protocol
[ instance ] | ip-address mask ] [ standby ] [ detail ]
DETAILED STEPS
PurposeCommand or Action
Displays route summary information about the specified routing
table.
show route [ vrf { vrf-name | all }] [ afi-all | ipv4 |
ipv6 ] [ unicast | multicast | safi-all ] summary [
detail ] [ standby ]
Step 1
•
The default table summarized is the IPv4 unicast routing
table.
Example:
RP/0/RSP0/CPU0:router# show route summary
Displays more detailed route information about the specified
routing table.
show route [ vrf { vrf-name | all }] [ afi-all | ipv4 |
ipv6 ] [ unicast | multicast | safi-all ] [ protocol [
instance ] | ip-address mask ] [ standby ] [ detail ]
Step 2
•
This command is usually issued with an IP address or
other optional filters to limit its display. Otherwise, it
Example:
RP/0/RSP0/CPU0:router# show route ipv4 unicast
displays all routes from the default IPv4 unicast routing
table, which can result in an extensive list, depending on
the configuration of the network.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
506
Implementing and Monitoring RIB
How to Deploy and Monitor RIB

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English