Cisco ASR 9000 Series Routing Configuration Guide

CHAPTER 12
Implementing RCMD
This module describes how to implement RCMD.
Feature History for Implementing RCMD
ModificationRelease
This feature was introduced.Release 4.2.0
•
Route Convergence Monitoring and Diagnostics, page 647
•
Configuring Route Convergence Monitoring and Diagnostics, page 648
•
Route Convergence Monitoring and Diagnostics Prefix Monitoring, page 651
•
Route Convergence Monitoring and Diagnostics OSPF Type 3/5/7 Link-state Advertisements Monitoring,
page 651
•
Enabling RCMD Monitoring for IS-IS Prefixes, page 651
•
Enable RCMD Monitoring for OSPF Prefixes, page 652
•
Enabling RCMD Monitoring for Type 3/5/7 OSPF LSAs, page 653
•
Enabling RCMD Monitoring for IS-IS Prefixes: Example, page 654
•
Enabling RCMD Monitoring for OSPF Prefixes: Example, page 654
•
Enabling RCMD Monitoring for Type 3/5/7 OSPF LSAs: Example, page 655
Route Convergence Monitoring and Diagnostics
Route Convergence Monitoring and Diagnostics (RCMD) is a mechanism to monitor OSPF and ISIS
convergence events, gather details about the SPF runs and time taken to provision routes and LDP labels
across all LCs on the router.
RCMD is a tool that collects and reports data related to routing convergence. Highlights of the RCMD
mechanism are:
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
647

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model