Cisco ASR 9000 Series Routing Configuration Guide

PurposeCommand or Action
Configures metrics for EIGRP.
default-metric bandwidth delay reliability loading mtu
Example:
RP/0/RSP0/CPU0:router(config-eigrp-vrf-af)#
default-metric 1000 100 250 100 1500
Step 7
commit
Step 8
Monitoring EIGRP Routing
The commands in this section are used to log neighbor adjacency changes, monitor the stability of the routing
system, and help detect problems.
SUMMARY STEPS
1.
configure
2.
router eigrp as-number
3.
address-family [ ipv4 ]
4.
log-neighbor-changes
5.
log-neighbor-warnings
6.
commit
7.
clear eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] neighbors [ ip-address | type interface-path-id
]
8.
clear eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] topology [ prefix mask ] [ prefix / length ]
9.
show eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] accounting
10.
show eigrp [ as-number ] [ vrf { vrf | all }][ ipv4 ] interfaces [ type interface-path-id ] [ detail ]
11.
show eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] neighbors [ detail ] [ type interface-path-id |
static ]
12.
show protocols eigrp [ vrf vrf-name ]
13.
show eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] topology [ ip-address mask ] [ active | all-links
| detail-links | pending | summary | zero-successors ]
14.
show eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] traffic
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
327
Implementing EIGRP
Monitoring EIGRP Routing

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English